Oscilloscope

Sencore SC301

Image shown doesn't reflect the condition of the equipment and is for illustrative purpose only.	BCS Price: $1,603.00 Item #: EQ457778U Condition: USED
Equipment Description: Referb. no longer made new Model Description: 150 MHz Oscilloscope & Component Analyzer

Model Details

Features:

• Auto Setup to quickly view waveforms up to 150MHz with a simple press of a button
• Active TV Sync Separator for stable triggering and viewing television waveforms
• On-Screen Display & Cursor for accurate voltage, time, and frequency measurements
• Easy-to-use built-in Component Analyzer
• Save & Recall functions for easy setup when viewing known signals
• RS-232 port for remote computer controlled operation
• A 14kV CRT for a clean and bright trace

• VERTICAL DEFLECTION Operating Modes : CH 1 or CH 2 separate, CH 1 and CH 2: alternate or chopped (0.5MHz chopper frequency, approx.)
• Sum or Difference : with CH 1 and CH 2 (both channels invertable)
• XY-Mode : via CH 1 and CH 2
• Freq. range : 2x DC to 100MHz (-3dB)
• Risetime : less than 3.5ns
• Overshoot Max : 1%
• Deflection Coefficients : 14 calibrated steps from 1mV/div. to 20V/div. (1-2-5 sequence) with variable 2.5:1 up to 50V/div.
• Accuracy in Calibrated Position : 1mV/div. to 2mV/div.: ?5% (0 to 10MHz (-3dB));5mV/div. to 20V/div.: ?3%
• Input Impedance : 1M Ohm in parallel with 15pF
• Input Coupling : DC-AC-GND (ground)
• Input Voltage : max. 400V (DC + peak AC)
• Delay Line : approx. 70ns
• TRIGGERING Automatic : (peak to peak) <= 20Hz-200MHz (<= 0.5 div.)
• Normal with Level Control : DC-250MHz (<= 0.5 div.)
• Slope : positive or negative
• ALT. Triggering : LED indicator for trigger action
• Sources : CH 1 or CH 2, CH 1 alternating CH 2, line, and external
• Coupling : AC (10Hz to 200MHz), DC (0 to 200MHz); HF (1.5kHz to 250MHz), LF (0 to 1.5kHz)
• NOI (Noise Reject) : >= 0.8 div.
• Active TV-Sync-Separator : positive and negative
• External : >= 0.3Vpp from DC to 100MHz
• Triggering Time Base B : normal with level control and slope selection, DC to 250MHz
• HORIZONTAL DEFLECTION Time Base A : 22 calibrated steps from 0.5s/div. to 50ns/div. in 1-2-5 sequence
• Accuracy in Calibrated Position : ?3%. Variable 2.5:1 up to 1.25s/div., with X-Mag. x10: 5ns/div. ?5%
• Holdoff Time : variable to approx. 10:1
• Time Base B : 18 calibrated steps from 20ms/div. to 50ns/div. in 1-2-5 sequence
• Operating Modes : A or B, alternate A/B
• Bandwidth X-Amplifier : 0-3MHz (-3dB) Input X-Amplifier via CH 2, (sensitivity see CH 2 specification)
• X-Y Phase Shift : < 3? below 120kHz
• OPERATION / CONTROL Auto Setup : automatic parameter section
• Manual : Front Panel switches
• Memory : 10 user-defined parameter settings
• Remote Control : with built-in RS-232 interface
• COMPONENT ANALYZER Test Voltage : approx. 8.5Vrms (open circuit)
• Test Current : approx. 8mArms (shorted)
• Test Frequency : approx. 50Hz
• CRT : D14-375GH, 8x10div., internal graticule
• Acceleration Voltage : approx. 14kV
• Trace Rotation : adjustable on front panel
• Calibrator : square-wave generator (tr < 4ns) approx. 1kHz/1MHz; Output: 0.2V ?1%
• Line Voltage : 100-240V AC ?10%, 50/60Hz
• Power Consumption : approx. 35 Watt at 50Hz
• Weight : 12.4 pounds (5.6kg)
• Dimensions (WxHxD) : 11.1" x 4.9" x 14.8" (285mm x 125mm x 380mm)

Additional Information

Get Adobe PDF Reader