Model Details
The CP-1600A is intended to be a cost effective panel for small systems. As with all Quartz panels, the buttons are individually programmable for functions such as source selection, destination selection, breakaways and locks, etc. The CP-1600A is typically used to control 16 sources and 16 destinations with four levels of breakaway and is neatly packaged in just 1RU of rack space. A version is also available as a local panel which fits onto the front of most standard Quartz 1RU router frames. The CP-1600A supports up to four levels of breakaway.
The CP-1601A is a simple 1RU panel intended as an entry level low cost panel for small systems. As with all Quartz panels the buttons are individually programmable for functions such as source selection, destination selection, breakaways and locks, etc. This ensures maximum flexibility of the system. The most common use is as a single destination 16 button-per-source input panel.
Features:
Features
- Fully programmable buttons to operate in a variety of modes, e.g. as 16x16 XY
- Button-per-source selection of 16 inputs
- Lock or Enable button to protect against unauthorized or accidental selection
- Buttons can be programmed for breakaways
- Push buttons with a quality action and red LED
- Slide-in designation strip for name legending
- Camera joystick override on any eight inputs, with momentary or latching action
| - Additional CP-1600A Features
- XY panel, programmable to control from one through 16 destinations with breakaway
- Single destination mode with breakaways
- Dual seven segment display shows current destination number
- Four levels of breakaway available
- Lock facility protects against accidental or unauthorized selections
- Chop mode for continuous toggle between any two sources
|
Specifications: Specifications
| Q-link to Remote Panels | 75? video cable 500m max. length |
|---|
| Serial RS232/422 (Optional) | D9 female |
|---|
| Parallel (Joystick Override) | D9 male, TTL levels |
|---|
| Supply | 90-132V, 180-264V, 50/60Hz |
|---|
| Consumption | 10 Watts |
|---|
| Height | 1RU, 44mm (1.75" nominal) |
|---|
| Width | 19" rack mount |
|---|
| Depth | 130mm (5" nominal) |
|---|
| Weight | 1.50kg (3.3lb) |
|---|
| Operating Temperature | 0-40°C |
|---|
Ordering Information
| Notes | • These part numbers refer to the hardware only. Precise operation is determined by the configuration of the control panel. |
|---|
| CP-1600A | Remote Mini XY Panel, BPS |
|---|
| CP-1600A-LP | Local Mini XY Panel, BPS. Supplied for use as a front panel on most 1RU frames |
|---|
| CP-1601A | Remote Panel, multi-mode 16 BPS and Lock |
|---|
| CP-1601A-LP | Local Passive Panel, 16 BPS and Lock. Supplied for use as a front panel on Q1601, Q1602 or with PI-1604/08 |
|---|
| CP-1601A-P | Remote Passive Panel, 16 BPS and Lock. (Has integral rack ears for 19" rack mounting, connects via D25 cable. Generally used with the Q1601 and PI-1604/08 |
|---|
| +S7 | Serial Interface & Protocol |
|---|
| CI-0003 | RS232/422 Interface (Enables the serial port and is fitted inside the panel) |
|---|
